120-210 t/h Mining Vibrating Feeding Machine Vibro Feeder in Stone Crushing Plant
Mining Vibrating Feeding Machine Introduction:
Vibrating feeder can feed lump or granulated materials to the other devices evenly and continuously. In sand and gravel production line, the continuous feeding of the vibrating feeding machine helps avoid the blockage at receiving hopper. Vibrating feeder is applied to crushing and screening production lines on crushing site, in mining, metallurgy, building material, chemistry, mineral processing, and coal industries.
Mining Vibrating Feeding Machine Features:
1. Vibrating feeder enjoys simple structure, stable vibrating, even feeding, good continuous performance, adjustable excitation force, etc. Its flow rate can be conveniently changed and controlled.
2. It adopts eccentric block as the excitation source and features low noise, low energy consumption, good adjusting performance, and no material splashing.
3. Closed type vibrating feeder can prevent the pollution of dust.
4. The pressure caused by the material to the groove should be reduced to the greatest extend. The effective discharge opening should be smaller than the one quarter of the groove width. The flow rate should be controlled within 6-18m/min.
5. For feeding materials with a large quantity, a feeder with enough height should be installed at the outlet. This feeder should not be fixed to the feeder since it will affect the performance of the machine.
6. For smooth charging, the best discharging angle is 55°-65°.
Technical Parameters:
| Model | Vibration frequency(r/min) | Double-amplitude(mm) | Capacity (t/h) | Power (kW) | Overall dimension (mm) | Weight (t) |
| GZD9538 | 970 | 4-6 | 120-210 | 2×3 | 3910×1520×1460 | 3 |
Vibrating Feeder Customer Visit:
Product Tags:
|
|
120-210 t/h Mining Vibrating Feeding Machine Vibro Feeder in Stone Crushing Plant Images
|
